New Arrival
Best Sellers
Digital Sound Level Meter TES-1150
RM  638.13  606.22  
Special Promotions
More information on product
Zhan Cup

Zhan Cup

Add to Compare
  Share This   Add To Facebook   Add To MySpace   
Part NoProduct NamePriceDetailsOptionsQty
ARIE 1126/1Zhan CupKindly Contact Us For Price
Stock: Stock available
ARIE 1126/2Zhan CupKindly Contact Us For Price
Stock: Stock available
ARIE 1126/3Zhan CupKindly Contact Us For Price
Stock: Stock available
ARIE 1126/4Zhan CupKindly Contact Us For Price
Stock: Stock available
ARIE 1126/5Zhan CupKindly Contact Us For Price
Stock: Stock available

All prices/stock are subject to change so ensure that you contact us (+603-5621 5786) before ordering from us.

If stock is unavailable, the delivery/resupply terms is within 8 - 12 weeks.

ARIE 1126 Zahn Cups can be used to quickly measure the viscosity of liquids such as Paint, Ink, Varnishes, Syrup and Oil. They are produced according to ASTM D 816, ASTM D 1084,and ASM D 4212. The Stainless Steel Cups are molded precisely and the orifices are precision drilled using high-speed CNC drilling.

        Each cup has a 12-inch loop handle to allow the cup to be dipped by hand into a liquid container.  At the center of this handle is a finger-ring for holding the cup in a vertical position during use. Their orifice diameters are set at the factory for appropriate results with applicable NIST traceable Newtonian oils.

        It is done by filling up the volume of Zahn Cup with the required liquid and then placing an index finger over the orifice to stop any flow out of the liquid. A ring at the Zahn Cup handle allows the cup to be hanged perpendicularly(still with the finger stopping any liquid flow out). Prepare a Digital stopwatch and set zero. Immediately start the stopwatch when the finger is released. As soon as there is a first “break” of the flow, stop the stopwatch. The second shown is the time of the liquid flow, which is also the flow viscosity of that liquid.

                 Every Biuged’s Zahn cup has its own coefficient “K”, which is marked on the cup body.

                                                       Fact Viscosity=Testing viscosity×K


Main Technical Parameters:

■ Volume of Cup:44ml
■ Length of Handle:40±0.1mm
■ Height of Cup:58±0.1mm
■ Measurement Temperature:25℃±1℃

■ Details of each Zahn Cups

Details/Zahn cup

Zahn cup 1#(ARIE126/1

Zahn cup 2#(ARIE126/2

Zahn cup 3#(ARIE126/3

Zahn cup 4#(ARIE126/4

Zahn cup 5#(ARIE126/5







Zahn Range sec






Centistokes Range







Very Thin Oil

Thin OilPaint

Medium Oil
Mixed Paint

Viscous Liquid and Mixtures

Very Viscous Mixtures

Ordering Information

ARIE 1126/1

ARIE 1126/2

ARIE 1126/3

ARIE 1126/4

ARIE 1126/5


NOTE: Both the Zahn Cups and the Iwata Cup are based on measuring the Flow of liquid in seconds. Hence, a precision stopwatch is required.

        Results should be reported in Zahn-Seconds at a specified temperature for a particular cup. To convert Zahn-Seconds to centistokes, refer to ASTM D4212, D816, and D1084

                                                           Centistokes ×Specific Gravity= Centipoise